Rifles |
| Test Fire | 15.50 |
| Check Headspace | 20.25 |
| Check firing pin protrusion | 20.25 |
| Make chamber cast | 44.50 |
| Remove fired case from chamber | 30.50 |
| Remove live round from chamber | 70.00 |
| Remove stuck bullet from barrel | 30.00 |
| Remove fouling from barrel | 50.00 |
| Lap new bolt | 125.00 |
| Cut and crown barrel | 100.00 |
| Install muzzle brake (parts not inc.) | 100.00 |
| Weld on new bolt | 90.00 |
| Forge bolt handle | 79.00 |
| Trigger install: Timney, Dayton-Traister, etc. | 66.00 |
| Trigger Install: Shilen, Jewell, and other match type | 100.00 |
| Trigger tune: 700, 70, A-bolt, Sako, etc. | 64.00 |
| Super tune factory rifles, Levels I, II, and III | P.O.R. |
Shotguns |
| Resolder rib (rebluing not included) | 200.00 |
| Resolder fore–end lug | 70.00 |
| Raise dent in barrel | 52.00 |
| Polish chamber/barrel | 40.00 |
| Clean, chase threads for screw–in chokes | 40.00 |
| Install adjustable chokes: poly–choke, multi–chokes, etc. | 1140.00 |
| Check feeding and extracting | 50.00 |
| Cut and crown | 53.00 |
Handguns |
| Revolver action tune | 70.00 |
| Rebarrel revolver (factory barrel) | 125.00 |
| Install crane lock | 50.00 |
| Remove/modify hammer spur | 40.00 |
| Semi–auto action tune | 62.00 |
| Tighten .45 slide | 110.00 |
| Fit barrel to .45 | 80.00 |
| Fit barrel bushing to .45 | 55.00 |
| Bevel magazine well on autos | 48.00 |
| Checker front frame on autos | 125.00 |
| Open/modify ejection port on autos | 55.00 |
| Throat, polish barrel and feed ramp on autos | 45.00 |
| Install custom trigger on .45 | 45.00 |
| Install custom hammer on .45 | 50.00 |
| Install custom safety on .45 | 50.00 |
| Tune trigger on most pistols | 50.00 |
